|
Post by nemesis on Oct 19, 2007 23:21:03 GMT 1
At the S.I.N.K meeting, I'll be the shrub drinking a pint o larger.
|
|
|
Post by mattyb on Oct 27, 2007 7:46:02 GMT 1
How many clamps per pack. And is one set enough for this build.
|
|
|
Post by eric on Oct 27, 2007 9:37:41 GMT 1
Ten per pack, I bought two packs.
|
|
|
Post by Achtung!! on Oct 29, 2007 15:20:45 GMT 1
I've just been on a spending spree - brought some plank clamps.,bending pliers and needle file.
*rubs hands gleefully*
|
|
|
Post by rem2007 on Oct 29, 2007 15:24:23 GMT 1
I bought 2 packs as well. It allows you to carry on planking quicker. Wasn't that a movie, Carry On Planking? Hmmmm robert
|
|
|
Post by Achtung!! on Oct 29, 2007 15:53:31 GMT 1
Erm possibly....
|
|
|
Post by Mark on Oct 30, 2007 3:00:05 GMT 1
Seems emminently apt for this forum
|
|
|
Post by Achtung!! on Oct 30, 2007 9:08:33 GMT 1
What size hole do you dril in the hull to accept the plank clamps
|
|
|
Post by mattyb on Oct 30, 2007 11:15:18 GMT 1
yeah I got two sets aswell, we all must be psyhcic..lol
|
|
|
Post by eric on Oct 30, 2007 13:57:59 GMT 1
What size hole do you dril in the hull to accept the plank clamps I've been using 1/2mm drill bit on my President, seems ok.
|
|
|
Post by Achtung!! on Oct 30, 2007 15:17:00 GMT 1
thanks guys
|
|
|
Post by mattyb on Oct 31, 2007 7:16:23 GMT 1
How long was the postage to Australia?? For ther ones who purchased here in Oz that IS
|
|
|
Post by Mark on Oct 31, 2007 7:26:57 GMT 1
What size hole do you dril in the hull to accept the plank clamps If you find that the frames are splitting when you screw the clamp in it means that the hole is too small. I found that I needed a larger hole (about 0.8mm) on the Bismarck.
|
|
|
Post by Achtung!! on Oct 31, 2007 9:01:41 GMT 1
blimey thats a small drill bit- best start looking for a small drill bit set.
|
|
|
Post by Mark on Oct 31, 2007 9:28:17 GMT 1
Ebay - do a search on micro drill bits - you should get a set of drills about 0.4 to 1.6mm for a few quid. Get a pin vice as well - they don't last long in the Black n Decker !!
|
|