|
|
Post by Mark on Mar 26, 2007 6:41:02 GMT 1
Got any quick tips - add them to this thread. Here's mine for starters Cotton buds are a great 'tool' for removing excess glue from a joint. They work great, just as long as there isn't too much excess glue oozed out. If there is, you're applying too much glue  |
|
|
|
Post by Matthew. on Mar 26, 2007 16:46:27 GMT 1
use a finger to get a perfect bead of glue down a side to reinforce a join
|
|
|
|
Post by russ on Apr 14, 2007 11:08:50 GMT 1
Allways have a clamp or some old pegs on hand to hold parts together
|
|
|
|
Post by Achtung!! on Apr 14, 2007 16:48:27 GMT 1
Mini Clamps 5 for £1.00 from Instore.
|
|
|
|
Post by viking on Apr 18, 2007 1:29:41 GMT 1
for fine detailed work a cheap pear of +3.50 reading glasses this leaves both hands free
|
|
|
|
Post by Mikey on Apr 28, 2007 0:47:32 GMT 1
Been dry sanding those wooden parts? Paper on your sanding block loosing its effectiveness? Try cleaning off waste dust using a medium to large paintbrush.
A quick way to refresh your sandpaper but a word of caution: sanding dust can be fine and easily inhaled. Best done outside and away from your face.
|
|
|
|
Post by jim on May 6, 2007 12:38:14 GMT 1
my tip which I hope dont sound too silly is, the leftover wood after removing frames etc I use a small saw to cut the corners off at 45 degrees and glue them against the frames as additional supports hey presto perfectly square frames. 4 brackets per sheet.
|
|
|
|
Post by Mark on May 6, 2007 15:47:58 GMT 1
An excellent tip Jim. It's worth keeping all the scrap wood - you never know when you're going to need the odd bit, or even have to manufacture a replacement part if you've screwed up. The holes in the fret are perfect templates |
|
|
|
Post by jim on May 20, 2007 18:18:17 GMT 1
Amati make an excellent tool called a plank nipper looks similar to a pair of pliers makes small v,s in the back of the plank and creates a curved plank mine cost about a fiver though i,ve had it for many years most model shops sell them hany when it come to planking the hull. If i ever get that far, i,m still on issue 5
|
|
|
|
Post by steve on Jun 6, 2007 18:24:15 GMT 1
u could use map pins to hold the planks at hull or bow if u havent got any plastic clamps to hold the planks so i alway use map pins from whsmith for 1 pounds...steve
|
|
|
|
Post by gordon on Jun 6, 2007 22:15:19 GMT 1
Now you may recall, during my introduction, that I pointed out the dangers of putting your fingers into a rotating propeller of an aero model - hence the move to the less dangerous hobby of model ships..
It turns out there are many hidden dangers with this hobby also. I have discovered that sanding the hull in readiness for planking, during a hot Aberdeenshire spring day (honest) , can lead to sun burn. Here are my tips for avoiding this painful and unsightly injury.
Pick a nice spot in your garden with some shade.
Have a parasol on hot standby in case you don’t notice the sun moving round.
Have an eight year old child on standby to bring your refreshments – age not to important as long as he understands the words ‘beer’ and ‘fridge’. (if you don’t have a child of your own you can borrow a neighbours but you tend to find older kids get bored and wander off).
Have wife/partner nearby – but not to close – to spread liberal amounts of sun blocker on your face (this is the part I forgot...)
Sand merrily until job done or until your tea is ready.
Happy and safe sanding..
|
|
ron
Cabin boy
Commodore (Retd)
Posts: 7
|
Post by ron on Jun 10, 2007 13:07:05 GMT 1
Hi Gordon
I came across this post while catching up on the site this morning, and see that your'e in Aberdeenshire.
I'm in Stonehaven and thought I was just about the only boat modeller this far north. I've spent time in the central belt, where there are a few model shops but up here, there seems to be very little. (I've a few other kits on the go and there's always something I need - it's a pain having to go to Scoonie in Kirkcaldy!)
Let's hear more of your experiences - I reckon you've got this business cracked!
Ron
|
|
|
|
Post by barbod on Jun 11, 2007 7:41:25 GMT 1
Hi you fellow northeners! I live just outside Brechin since I was deported from England a year ago for supporting Mansfield Town FC. Hence I am not a Scot. But a sassenach through and through! Only thing I miss is Lincolnshire sausages.
My experience is also limited, an 3/4 of the way through the titanic and am also building the 'King of the Mississippi' By Artesania Latina at the same time. Do a bit on each when I feel like it. That wasy I have always got something to do when I get fed up of planking the hull!
|
|
|
|
Post by gordon on Jun 11, 2007 12:24:59 GMT 1
Ron,
I couldn’t agree more on the lack of decent model shops this far north. I’m in Ellon and often pop into Marionville or Wonderland in Edinburgh when I am visiting mates. There is a decent shop in Inverurie which mostly sells plastic and diecast kits but they do keep a decent selection of paints etc.
I am by no means an expert in the world of modelling (more of a ‘social convenor’ for most hobbies) and have only really dabbled with plastic and aero models. The Bismarck is my first attempt at a ship model and, so far, I am really enjoying it. Had a few early problems but this forum has been a great help.
Gordon..
|
|
|
|
Post by alanv on Aug 27, 2007 11:56:34 GMT 1
A quick tip that might come in useful. I have several plank on frame models and whilst soaking some nice planks of what i think is mansonia (lovely dark colour) in the soaking trough (bath) imagine my suprise when on emptying said bath the bottom was stained a nice shade of brown. luckily I managed to remove stain before her indoors spotted it , what can I do about this I thought?? My solution a lenghth of plastic waste pipe 2 straight connectors and 2 end stops. Cut pipe to the length you need then put on end stop place wood inside fill with water and hey presto you can put it any where you want. I put a stop on both ends incase cat knocks it over. Hope this is a good tip for someone.
AlanV.
|
|
