|
Post by markus on Feb 2, 2008 12:01:52 GMT 1
finally found a way to fix props with bigger threads onto M2 threaded shafts this might be a way to use lassek's brass props, which are only available with M3 thread graupner nylon props from the drive sets have a brass insert with 3,8mm outer diameter. if we remove that insert we can modify a bit: 1. using M3 props: drill a 3,8mm hole into the brass prop and glue/solder this insert into the prop 2. using M4 props: press the insert into the M4 thread and glue/solder in place or cut a M4 thread onto the insert and screw into the prop haven't tested these modifications by now - will order lassek props next week and post the results...
|
|