|
122
Jul 1, 2009 9:31:59 GMT 1
Post by chris on Jul 1, 2009 9:31:59 GMT 1
what length is the dowl rod bits to fit the main turrets? i'm thinking about an inch? also when doing the main guns make sur b&c r straight mine pointed down!!!
|
|
|
122
Jul 1, 2009 15:45:05 GMT 1
Post by eric on Jul 1, 2009 15:45:05 GMT 1
I don't get 122 for several weeks Chris, I'm only up to 121 so far.
What are b&c's Chris? I should be able to guess.....but for the life of me I can't get it!!!
|
|
|
122
Jul 1, 2009 16:05:55 GMT 1
Post by Achtung!! on Jul 1, 2009 16:05:55 GMT 1
b could be brass..
|
|
|
122
Jul 6, 2009 9:07:05 GMT 1
Post by chris on Jul 6, 2009 9:07:05 GMT 1
when u put the gun barrels into the main turret sockets they hang down, well mine did. so b-c turrets need to be straight when they go over the a-d turrets. does that help?
|
|
|
122
Jul 6, 2009 9:10:03 GMT 1
Post by Achtung!! on Jul 6, 2009 9:10:03 GMT 1
Ah now I understand - the turrets - A = Anton, B = Bruno etc. Your saying that the barrells from Bruno and Ceaser are hanging down.
|
|
|
122
Jul 6, 2009 11:40:53 GMT 1
Post by markus on Jul 6, 2009 11:40:53 GMT 1
had the same problem, so i removed the notch and glued the barrels in slightly elevated position:
|
|