|
Post by matt on Aug 5, 2009 21:25:42 GMT 1
parts 761 and 762 page 167 photo 07 and 08. Mine seem to deep. If I fitted as instructed I would not be able to move the deck flush with the other superstructure? Has any one else had this problem??
|
|
|
Post by mike on Aug 5, 2009 21:45:58 GMT 1
Hi matt I had the same problem fitt the parts so they are under the lip of the deck. then sand off bottom so its flush this is what I did , hope this helps mike
|
|
|
Post by Achtung!! on Aug 6, 2009 16:08:17 GMT 1
Which issue number is this?
|
|
|
Post by mike on Aug 6, 2009 17:16:11 GMT 1
Issue number 83 Chill hows the thumb getting better I hope mike
|
|
|
Post by Achtung!! on Aug 6, 2009 21:10:06 GMT 1
Oh yes well on the way to getting better - swelling has gone down!
|
|
|
Post by popeye on Aug 7, 2009 10:02:25 GMT 1
Same with me. Fitted reference point was against the deck at the top then sanded flush underneath.
|
|
|
Post by matt on Aug 7, 2009 18:49:20 GMT 1
Thanks for the help
Matt
|
|