|
Post by eric on Jan 12, 2010 0:35:03 GMT 1
Is it just me, or is issue 139's instructions a bit off?
There is no guide as to certain numbered parts called out to be attached, they are yellowed off on the first page as if not required, so a lot of guess work seem to be required, also some parts are seen attached in the instruction photos, but they are not mentioned to be attached!
on page 308 step 08 part number 1533 is to be attached to the lower bridge, but there is no mention of it in the front page!
Just which part is 1533???
Confused, Eric.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 12, 2010 3:20:57 GMT 1
For part no. 1533 try looking at the plastic sprues you got with issue 138 or are showing on the parts page of issue 138, (if I'm reading the Die Bismarck pictures right). It's to the left of part no.1516 on 1 of the sprues from issue 138. If you can remember which sprue part no. 1516 was on. It's the righthand one in this picture www.subifa.de/heftvorschau/h138_2.jpgHope this makes sence.
|
|
|
Post by gordon on Jan 12, 2010 8:31:44 GMT 1
Eric,
I noticed the same thing, particularly the gun recesses which show lots of hatches which were never mentioned - and I did check.
FYI, issue 140 doesn't get much better!
|
|
|
Post by eric on Jan 12, 2010 13:11:30 GMT 1
Cheers Skyfire, I thought that was the part, but did'nt want to just bung it on and find later that I had made a booboo! A little K for your help! With most of the parts that are not mentioned I can see what they are by the pics, but not with 1533!
|
|
|
Post by alanharg on Jan 29, 2010 14:34:45 GMT 1
I have also found the smae problem of identifying plastic parts . However my concern is that I cannot find anything that resembles part number 1607!!
Any suggestions?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 30, 2010 4:06:01 GMT 1
|
|
|
Post by alanharg on Jan 30, 2010 17:30:52 GMT 1
Many Thanks for your help.
Unfortunately my plastic moulding is not the same as the one pictured in the instruction sheets. Two of the yellow components are not present on my framework. I actually have a spare (identical) unused moulding to examine due to Hachette including the wrong instructions in the original mailing for issue 138!!!
|
|
|
Post by max42 on Jun 14, 2013 18:34:38 GMT 1
I've had a look at a look at the moulding ... and same as Alanharg different moulding Did find part 1533 so not all's lost but can not find where 1607 is
|
|