Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 21, 2010 9:28:11 GMT 1
This is mainly for those of you that ordered the gun barrels from Europe and if so which ones did you use on the AA guns in this issue. The ones that came with the magazine or the ones from Europe, if the ones from Europe, then which ones. Also any ideas on how to drill out the plastic as it's just melting onto the drill bit, if I use my motor tool to do it.
|
|
|
Post by Achtung!! on Jan 21, 2010 11:28:23 GMT 1
I didnt use a motor tool on it- used my pinvice to slowly drill out the holes, stopping every so often to remove the swarf from the bit and hole.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 21, 2010 12:45:58 GMT 1
Ok, now to find where to get a pinvice, maybe one of the tool shops or one of the model shops.
|
|
|
Post by Mark on Jan 21, 2010 15:38:23 GMT 1
Tamiya make them. your drill is too fast. Can you slow it down
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 22, 2010 1:56:35 GMT 1
Not without it stalling, will go hunting for a pinvice later on.
|
|
|
Post by Mark on Jan 22, 2010 2:18:37 GMT 1
|
|
|
Post by Achtung!! on Jan 22, 2010 9:27:44 GMT 1
Mine is very similar - but all silver.
|
|
|
Post by julianbest1 on Jan 22, 2010 11:00:13 GMT 1
The one I use is the one that got issued with the Titanic build.
|
|
|
Post by Achtung!! on Jan 22, 2010 11:05:21 GMT 1
I've stil got that one
|
|
|
Post by Mike B on Jan 22, 2010 14:31:26 GMT 1
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 22, 2010 23:58:12 GMT 1
Found one easily enough at a hardware store, along with some other tools I decided I suddenly needed. - LoL ;D
|
|