|
Post by rod on Apr 3, 2010 12:52:35 GMT 1
I'm trying to put together the light anti aircraft guns and seem to be having some issues. Its easy enough to understand the instructions, but the problem I have is when trying to bend the gun sights up, I just can't seem to get them to bend properly, ie they turn out all mangled looking. I've had 4 goes at this and still don't have a technique. Picture below shows the offending items: Has anyone got a decent way of bending these tiny little pieces? thanks Rod
|
|
|
Post by Mike B on Apr 3, 2010 21:10:28 GMT 1
Just a suggestion, are you bending them the right way? Usually, the half etched bend point goes on the outside of the bend?
|
|
|
Post by rod on Apr 19, 2010 21:35:48 GMT 1
Hi Mike, sorry I only just saw this message, it must have been a busy message day for me to miss it. I actually tried bending them both ways to see if it made a difference.. it didn't In the end I just did the best I could with a pair of my finest pliers. They are so small, I don't think anyone will notice the little kinks. Rod
|
|