|
Post by matt on Nov 1, 2010 16:42:00 GMT 1
I need a little clarification on the graupners connectors/ Made up of three parts. One goes onto the motor shaft the other onto the prop shaft and joined together with a spider like thing in the middle. The spider like thing in the middle has two holes in it. Does on side of the prop shaft have to go into it and on the other the motor shaft or does it not matter? My final question is why 3 locking screws? is one spare or where does the third go? I hope thats clear
Matt
|
|
|
Post by markus on Nov 3, 2010 18:17:01 GMT 1
the holes are intended as an assembly help - don't put any shaft into those holes...
just put a small drill bit into the hole. this 'drill bit extension' makes assembling much easier.
the 3rd screw is a spare one
markus
|
|
|
Post by matt on Nov 4, 2010 12:39:07 GMT 1
thanks for the information Markus
Matt
|
|