|
Post by swanrail on Jul 5, 2007 20:52:14 GMT 1
Here a some pictures of my fitting of the mini servo for the turret Dora: Note that the marked piece with the cross for the axis of the turret, needs to be removed. Here the part has been cut out, and the parts 61 trimmed to take the shape of the servo. Also can be seen the two mounting blocks for the servo screws. Note also that the servo needs to be mounted ACROSS the hull, else it fouls the servo already fitted for the rudders. Here the mini servo is being tested in position before fastening to the under side of parts 61. Also can be seen the rudder servo, which has been fixed so that the rotating arms are at the stern of the vessel, else they will foul the turret servo. The micro servo is now fastened down and the parts 61 glued to the frame as per issue 19. I have also indicated the position for the turret Caesar, but expect this servo to go into the superstructure when fitted.
|
|