|
Post by rem2007 on Jun 6, 2008 23:47:02 GMT 1
don't get me wrong griffin but i think there's something wrong with the length of the outer shafts. normally the outer props are located approx. 30mm in front of the inner prop (seen from bow) You should consult your GP as well, that toe looks hurting!
|
|
|
Post by griffin247 on Jun 7, 2008 6:40:53 GMT 1
cant set speed controller , light not blink etc all wiring is correct ,
|
|
|
Post by griffin247 on Jun 7, 2008 7:27:27 GMT 1
ok panic over mr manering , now have running rc gear , must have had the gremlins in the house yesterday as i not changed the set up but its running now ,,,,,,,,, so now iam of to redo the holes in the hull were shafts come out ,,,,,,, why i got the muxsic from shaft in head
|
|
|
Post by markus on Jun 7, 2008 8:21:38 GMT 1
|
|
|
Post by griffin247 on Jun 8, 2008 22:25:12 GMT 1
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 9, 2008 1:30:04 GMT 1
Why cut such a large hole for 1 of the shafts.
|
|
|
Post by griffin247 on Jun 9, 2008 1:52:01 GMT 1
cause that first hole i cut out due to damaged planks , should be repaired tomorrow , then sanded then resprayed
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 9, 2008 2:42:38 GMT 1
Ahh ok.
Looks like the random-plank-damager from textron-4 is on the loose again. hehehehehe ;D ;D ;D
|
|
|
Post by griffin247 on Jun 9, 2008 10:23:37 GMT 1
erhm no i was attacked by gremlins whilst working on her and had to beat them off with the boat hence the damage .......................no wait was that last weeks movie ..............no yes thats right , it was just after i left the grassy knowle well oppersite the grassy knowle
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 9, 2008 10:53:54 GMT 1
LoL ok.
|
|
|
Post by griffin247 on Jun 13, 2008 12:52:14 GMT 1
|
|
|
Post by griffin247 on Jun 14, 2008 14:40:12 GMT 1
Re: Griffins Build « Reply #40 Yesterday at 11:52am »
-------------------------------------------------------------------------------- standby for brass bit work pics , actully thinking of growing thumbnail and forefinger nail to help with placing oof said brass bits .
and heres the [ics you lucky people , hull holes for shafts done need sanding and moding slighty internal gear held in place with blue take and brass bits and decking coming along , rudders orderd from cornwall boats , so here s the pics .
|
|
|
Post by nm on Jun 14, 2008 17:45:33 GMT 1
sg - it's So Good!
NM
|
|
|
Post by popeye on Jun 14, 2008 22:12:29 GMT 1
See my pics and how I protected my prop shaft through the hull at: www.flickr.com/photos/commander-popeye/A full explanation is listed in "Radio Control : brass m4 props" topic, although each picture in Flickr has its own explanation.
|
|
|
Post by griffin247 on Jun 15, 2008 0:52:27 GMT 1
i saw that thanks popeye very cool
|
|