|
Post by stroker on Nov 22, 2008 5:47:39 GMT 1
I saw a link on here the other morning for a polish site that supplies metal barrels, but be buggered if I can find it again and i have been through just about everything on here, does anyone know what section it was in? thanks, Steve
|
|
|
Post by nm on Nov 22, 2008 9:10:33 GMT 1
|
|
|
Post by Robert on Nov 23, 2008 19:30:23 GMT 1
I saw a link on here the other morning for a polish site that supplies metal barrels, but be buggered if I can find it again and i have been through just about everything on here, does anyone know what section it was in? thanks, Steve Stroker, it was in the thread "News Flash" and here it is for you again To answer your question, Stroker, it's definitively ref:6240/80 Gun Barrel 380mm Calibre (£1.08). But be careful, the length is not suited to our turrets (where barrels have to reach the inside holes) but theirs, in plastic. This website in Germany sales a more suitable set at a rather expensive price www.moduni.de/product_info.php/products_id/1310182Finally, I bought mine in Poland! Just needed to extend the barrel length with the little help of a 5mm diameter aluminum tube (that I'll soon replace for plastic). Contact first the company; their calculated delivery cost shown when ordering is wrong! Including P&P, it should not exceed 20 Euros -- well, that's what I paid altogether to have it delivered to France. www.gpm.pl/eng/index.php?akcja=produkt&edycja=101Hope this will help you (again!) in your endeavor. Cheers from Paris! Robert (saved you from being buggered? ;D)
|
|
|
Post by danny on Nov 23, 2008 23:15:20 GMT 1
I have seen a site somewhere that sells super detailed AA turrets ( base in resin, turrets and other details in brasswork).
I'm going to look for that site, hold on...
I doubt amati's AA guns are going to look good after seeing the main guns...
|
|
|
Post by danny on Nov 23, 2008 23:22:43 GMT 1
|
|
|
Post by stroker on Nov 25, 2008 22:36:21 GMT 1
To late to save me from being buggered, lol.. I (I must not write naughty words) meself up all the time... So it maybe both to costly and to much mucking around for me to fit those Polish ones, but thanks guys for all the other links I will have a bo-peep at them. I am not in the elitiste model league so might be a bit of overkill for me going to to much expense, but then again something may as well look good on the (I must not write naughty words) I guess :-) So many thanks, Nm Danny and Robert and A gedday to you in Puree fine Sir.
|
|
|
Post by stroker on Nov 25, 2008 22:37:18 GMT 1
Buggar aint naughty, its Australian :-)
|
|