|
Post by subculture on Jan 6, 2009 22:45:06 GMT 1
Finally I dare to post my first Bismark diary post. Some have seen my subs, well here's the beginning of my Bismarck. We've just started here in the Netherlands with the series. Soon we'll be getting issue 18 to 21 (we get 4 issues every 4 weeks). Here goes: It's sanded (60 , 120, 240 and 400 grid) and the inside has a G4 coating (for waterproofing). It is going to be a 3 motor setup with hopefully a few extra functions thanks to the homebuild decoders from a german guy which has made it possible to chop 1 servo channel in to 12 parts for functions. It functions the same way as the original Robbe decoders. grtz. Danny
|
|
|
Post by Robert on Jan 7, 2009 11:05:17 GMT 1
Looking nice, Danny.
When you'll come to resin parts and get trouble with them (one never knows), feel free to contact me, I still have some spare pieces in stock that could help you.
Heel Gelukkig Nieuwjaar aan u! Robert
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 7, 2009 11:35:20 GMT 1
Any chance of a pre drilled part d The resin part that the center shaft runs through. Didn't get my drilling quite centered.
|
|
|
Post by Robert on Jan 7, 2009 19:12:28 GMT 1
Skyfire... You've got mail!
|
|
|
Post by markus on Jan 8, 2009 12:37:42 GMT 1
hi skyfire ! robert v2.0 kindly asked his friend from germany to drill his spare 'part D' for another friend from australia... by the way, which diameter do you need on your 'part D' ? ;D markus
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 9, 2009 0:08:19 GMT 1
Would 6mm be enough, or would it have to be drilled out to the 8mm as per your drilling pattern. A massive thankyou to robert v2.0 and Markus. Karma going your way.
|
|
|
Post by Robert on Jan 9, 2009 1:13:25 GMT 1
And a massive thankyou to Subculture, too. You’re conscious that we have totally jammed his thread, guys! Danny, for having initiated the mess, please accept my apologies along with those from Skyfire and Markus!
;D ;D ;D
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 9, 2009 2:35:39 GMT 1
Sorry for the hi-jack Danny, it's just 1 of those things that seems to happen around here. Dunno why, it's not as if we try to do it. - LoL ;D ;D ;D
|
|
|
Post by subculture on Jan 9, 2009 7:26:39 GMT 1
No problem, these thing happen here. I've seen it before in other threads. There isn't much else yet but a bare bone hull over here, so no news for you guys.
grtz.
Danny
|
|
|
Post by danny on Jan 9, 2009 11:00:39 GMT 1
Would 6mm be enough, or would it have to be drilled out to the 8mm as per your drilling pattern. A massive thankyou to robert v2.0 and Markus. Karma going your way. I've managed to get my propshaft to fit with just drilling a 4mm hole, and without tapering the hole at all... I just measured about 5 times before I drilled and now it fits perfectly ;D oh, and sorry for continueing the offtopic talking danny... Might post some pics of my build later today.
|
|