|
Post by chris on Feb 21, 2009 11:23:31 GMT 1
i know this was mentioned before but can some kind person remind me which side has to be sanded down to fit and how much should i reduce it by??? many thanks
|
|
|
Post by markus on Feb 21, 2009 13:08:22 GMT 1
the inner side has to be sanded down by approx. 2mm (the inner side has a higher wall and a ledge next to the roof)
markus
|
|
|
Post by Achtung!! on Feb 21, 2009 15:22:55 GMT 1
oh eck - just built mine....
|
|
|
Post by Achtung!! on Feb 21, 2009 16:01:07 GMT 1
so which bit needs sanding...
|
|
|
Post by markus on Feb 21, 2009 19:42:34 GMT 1
so which bit needs sanding... sanding each hangar down to 27mm is sufficient
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 22, 2009 9:51:51 GMT 1
Why do they need sanding
|
|
|
Post by markus on Feb 22, 2009 11:29:50 GMT 1
there's no space between the hangars and the railings between hangars and 15cm turret markus
|
|
|
Post by chris on Feb 22, 2009 16:44:49 GMT 1
many thanks mackas
|
|
|
Post by markus on Feb 22, 2009 17:12:49 GMT 1
you're welcome, cross
|
|
|
Post by Robert on Feb 23, 2009 12:27:16 GMT 1
LOL Mackas!
Rupert ;D
|
|
|
Post by chris on Feb 25, 2009 10:11:05 GMT 1
sorry MARKUS ANTHONY i was busy with with cleo and was'nt watching the keyboard!!!
|
|
|
Post by chris on Mar 26, 2009 10:08:48 GMT 1
do 109's boats go up front or 110'S? if it's 109's then they've shrunk???
|
|
|
Post by eric on Mar 26, 2009 16:21:06 GMT 1
The biggest launches go outside, then two smaller ones inside.
Four identical launches are aft on the main hanger roof at the mainmast.
|
|