|
|
Post by napoleon on Apr 23, 2009 1:06:36 GMT 1
Hi Markus,
Railings arrived today, in good order (well wrapped), thanks very much for your kindness and help.
Regards
Napoleon
|
|
borry
Deck hand
Posts: 16
|
Post by borry on May 1, 2009 20:32:55 GMT 1
Hi Markus,
I have been meaning to ask you. What are those squiggly things on the railings sheets.
Regards
Borry
|
|
|
|
Post by markus on May 2, 2009 9:45:47 GMT 1
if you mean those parts that look like the letter 'P' - don't know either...
markus
|
|
|
|
Post by nm on May 2, 2009 15:12:01 GMT 1
if you mean those parts that look like the letter 'P' - don't know either... markus Maybe there's another set of railings with "S" for the starboard side? nm |
|
borry
Deck hand
Posts: 16
|
Post by borry on May 2, 2009 15:27:08 GMT 1
Fair comment nm
borry
|
|
|
|
Post by poulw on May 2, 2009 22:35:53 GMT 1
if you mean those parts that look like the letter 'P' - don't know either... markus Not quite sure either, but I think it could be the first and last stanchions for a section of railing - in the same way as railing for stairs normally ends. |
|
borry
Deck hand
Posts: 16
|
Post by borry on Oct 19, 2009 20:24:11 GMT 1
Hi Markus,
Hope you are still about. I am nearly at the stage where I will be fitting your superb railings and I wondered about the extra bit of railing on the long ones. Is that excess to requirements or do I leave it on, as it isn't even a half railing.
Also I think I have fathomed out what those little P shaved things are. I reckon they are for sticking in the template as you drill the holes for the railings.
Regards
Borry
|
|
|
|
Post by markus on Oct 20, 2009 11:40:04 GMT 1
posted a diagram on the previous page where to put the 3 shorter railings...
the shorter ones are used near the bow(2x) and stern(1x)
the little 'P' can be used at the ends if you intend to leave a gap (when using the stairs outside the hull)
markus
|
|
|
|
Post by mechwise on Dec 15, 2009 19:26:16 GMT 1
Marcus - it is now December 09 and I am just getting round to adding the railings - can you please tell me where I can obtain the etched railing that you have used, where do you use the rigid rails and went do you use the 'saggy' ones? Also, what price are these etchings?
Loking forward to your reply
Happy Xmas
WARNER
PS: Would it not have been better to leave all painting until the end - I certainly have not painted my hull yet and it will be the last thing I do!
|
|
|
|
Post by Mike B on Dec 15, 2009 20:52:46 GMT 1
|
|
|
|
Post by mechwise on Jan 21, 2010 18:02:16 GMT 1
MARCUS - have bought railings from John Haynes, but they are only of 3 rails.
Where do I get the white copper 4-row railings from - any web or email contact would be useful.
Look forward to your reply
WARNER
|
|
|
|
Post by critter on Jan 22, 2010 3:21:33 GMT 1
Marcus, looking for a set of the quality railings that you have supplied to others, how does one go about obtaining a set, ie cost and postage to New Zealand
critter
|
|
|
|
Post by markus on Jan 22, 2010 18:18:44 GMT 1
the railings came from my small local model shop - this shop has no internet platform so i have to order them by phone and pick them up a few days later
for those who like to order a set - just send 55 euro via paypal to my email address which can be found in my profile
markus
|
|
|
|
Post by paulhbell on Jun 16, 2010 20:31:13 GMT 1
Railings arrived today, thank you Markus.
|
|
|
|
Post by markus on Jun 17, 2010 14:13:24 GMT 1
always a pleasure  |
|
