aceuk
New recruit
Posts: 2
|
Hi
Jul 29, 2007 0:52:10 GMT 1
Post by aceuk on Jul 29, 2007 0:52:10 GMT 1
Hello all, would just like to introduce myself to this forum as a first time poster. Have been reading this forum for a while now and I have one or two questions. Please bear with me.
As a totally new person to modeling, I am a big military history fan, hence the interest, my main concern is "is this project a bit too ambitious for me ?" I have been reading that the planking can be a bit hard for even you experienced guys to get right, what chance do I have ? I currently have all issues from 1 - 21 untouched and awaiting workl
Shall I try it or stop wasting my money ?
Great forum, great site, and I love the week by week and hints.
S!
Nick
|
|
|
Hi
Jul 29, 2007 4:20:57 GMT 1
Post by Mark on Jul 29, 2007 4:20:57 GMT 1
Hi Nick, Welcome aboard. Is this project too ambitious ? Well, if you went into a model shop and just brought a complete kit I'd say it certainly was too ambitious for a beginner. However, with a partwork you get very detailed instructions which make it a lot easier, so a beginner should be able to complete it (assuming you're not ham fisted ) Just take the planking one plank at a time. It's really not that difficult if you take it slowly. Test fit each plank and make sure you kow that it fits before before openning the glue pot. Glad you like the site. PS - I've moved this into the Introductions section.
|
|
|
Hi
Jul 29, 2007 10:08:45 GMT 1
Post by paul on Jul 29, 2007 10:08:45 GMT 1
Hi Nick,
welcome aboard.
Don't give up mate. Gibe it a try. The Titanic was my first modell of that size and made of wood and I'm very pleased with the result. The Bismarck is my second try and I'm confident to finish it and to get a good result at the end. You'll get a lot of help here and I'm sure, you'll make it.
Cheers
Paul
|
|
|
Hi
Jul 29, 2007 11:35:16 GMT 1
Post by gordon on Jul 29, 2007 11:35:16 GMT 1
Welcome aboard Paul,
Like you, this is my first ship model and I to found it a bit daunting at first. With the help of these guys and a little patience, I have nearly completed the first layer of planking and found it quite easy and enjoyable.
Gordon..
|
|
|
Hi
Jul 29, 2007 13:52:01 GMT 1
Post by Robert on Jul 29, 2007 13:52:01 GMT 1
Hey nick, no don't give up mate. I haven't modeled since I was a kid and am really getting into his kit. Find a local club and get down and meet some of the local builders and the tips from both here and the pond are your encouragement. My partner thinks I've gone batty but at least it's harmless and you'll learn loads. contact me anytime for a chat. cheers robert
|
|
|
Hi
Jul 29, 2007 14:07:27 GMT 1
Post by napoleon on Jul 29, 2007 14:07:27 GMT 1
Hi Nick, Welcome aboard. Like you, I'm a first time wood modeller but with the good instructions in the mag and the great guidance of the peeps on here, I have managed to complete the 1st level of planking and whilst "self praise is no praise" I'm pretty happy with my build so far. So go for it and have fun and enjoy!!
|
|
|
Hi
Jul 29, 2007 14:23:29 GMT 1
Post by rem2007 on Jul 29, 2007 14:23:29 GMT 1
doh....just remember my log in, at this rate I ll never get promoted, welcme again nick
|
|
|
Hi
Jul 29, 2007 16:44:49 GMT 1
Post by Achtung!! on Jul 29, 2007 16:44:49 GMT 1
So it's a resounding yes for you to continue. Just take your time, its not a race to build it. Im only on issue 13 at the moment lots to do.
|
|
|
Hi
Jul 29, 2007 21:56:17 GMT 1
Post by bob on Jul 29, 2007 21:56:17 GMT 1
Hi Nick, The instructions in the book are very good for a beginner, plus there is lots of help available here on this site. I suggest you throw away the glue supplied and use Evostik Waterproof Glue, its far superior. Dry fit all parts and make sure they fit before applying glue, and ensure they fit square. The planking is not too hard on this model and the instructions are quite good in the magazine. Good luck mate
|
|
|
Hi
Jul 29, 2007 22:08:09 GMT 1
Post by swanrail on Jul 29, 2007 22:08:09 GMT 1
Welcome Nick, as the others say, please ask for any advice you want. The model would be frightening if you had all the parts at once and poor instructions for beginners (unfortunately, that is what you normally get with kits). Luckily, here the pace is very slow, you can take advantage of us pushing ahead to see what sort of problems we get so as to make your build easier, and we also have some guardian angels watching over us in the form of our German colleagues, who being some 20 or so issues ahead of us can offer even more help (and they are willing to do so). Remember - when in doubt ask before doing it!!!!
|
|
|
Hi
Jul 29, 2007 23:32:15 GMT 1
Post by paulhbell on Jul 29, 2007 23:32:15 GMT 1
Welcome. I would agree with the other guys, give it a go. But do use bob's advise and get a good waterproof glue, I'm using the same stuff as him, Evostik Waterproof Glue. Don't be affraid to ask questions, even if it is a simple one, people will answer you.
|
|
aceuk
New recruit
Posts: 2
|
Hi
Jul 30, 2007 22:13:29 GMT 1
Post by aceuk on Jul 30, 2007 22:13:29 GMT 1
Well thanks for the words of encouragement, I feel a lot more confident now and will begin my build soon once I got and get the correct glue Thanks again all. Nick
|
|
|
Hi
Jul 31, 2007 19:55:34 GMT 1
Post by valleydweller on Jul 31, 2007 19:55:34 GMT 1
Hi Nick, Like all the other first timers here I was like you at first, I can honestly say that without the hints and tips (as well as an excellent community) found here I would've quit in the first month. But thanks to the board members I've percivered and I think I'm doing quite well. One thing I have found is that you need so much more than a sanding block and glue, I must've spent at least £100 on other tools and things but I consider it money well spent. Rest assured if you find yourself bogged down stop what your'e doing then ask here. There will be someone who can help in one way or another. Enjoy your build Dean
|
|