|
Post by juan on Sept 6, 2010 4:34:00 GMT 1
Hi Guys, I have finished the hull but now I realise i forgot to drill the hole for the middle shaft, I have holed the resin part and the last bulkhead but now I have to drill all the rest of the bulkheads including the middle one any ideas how can I do it?.
Juan.
|
|
|
Post by russ on Sept 6, 2010 23:12:13 GMT 1
Could trya dremel witha cuttign disk on the end
|
|
|
Post by markus on Sept 7, 2010 13:07:05 GMT 1
you can reinfore both sides of the keel with some pieces of timber and use a long 6mm drill...
|
|
|
Post by juan on Sept 8, 2010 3:30:29 GMT 1
Both ideas are good, the problem would be to find a 6 mm drill long enough to drill it to the end, I could try with the cutting disk, I'll let you know how I did it and post the pictures.
Juan
|
|