allemand R/C gears

gerard
Deck hand

Posts: 24

allemand R/C gears Apr 1, 2008 15:08:09 GMT 1

Quote

Post by gerard on Apr 1, 2008 15:08:09 GMT 1

Hi Markus,
I' present to you: I'm frenchand a new member on this forum.
I' just beginning to build the Bismarck. Iwant motorise with 3 motors. I've seen on forum your beautiful realization. Can you expedite to me some items? If yes,can you give me prices for:
-Kit motor drive(3 Speed 400 6 volts,propshaft,3 brass propellers of Lassek,cardan joints)
-The samethings without 3 motors.
-V-mixer.
-3 speed controllers.
-2 safrans of Lassek and levers
-2 y-cable.
-5 cells Nimh 9000 mah.
-3 condensators.
-Shipping cost for France.
Means of paiement(French bank check,e-card,etc...)
Thanks for response. Excuse-me for my English:it's not very good and i don't speak and write German.
Congratulations.
gérard.

P.S.for information:With my calculation(according to picture of Tirpitz propellers,the diameter of proshaft is 658 millimeters but it's not certain.

nm Admiral Posts: 2,465	allemand R/C gears Apr 1, 2008 15:26:39 GMT 1 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by nm on Apr 1, 2008 15:26:39 GMT 1 Welcome, Gerard! NM

markus
Commander of the fleet

french lady

Posts: 1,495

allemand R/C gears Apr 1, 2008 16:29:30 GMT 1

Quote

Post by markus on Apr 1, 2008 16:29:30 GMT 1

hi gérard !

welcome to our forum, think it's the best you can find on the net..

of course i can also deliver to france

here's the prices:

-Kit motor drive 90 euro
-3 brass propellers of Lassek 50 euro
-V-mixer. 30 euro
-3 speed controllers. 90 euro
-2 safrans (rudders) of Lassek 20 euro
and levers 15 euro
-2 y-cable. 10 euro
-5 cells Nimh 9000 mah. 70 euro
-3 condensators. 5 euro
-Shipping cost for France. 0 euro (included)

the motor kit includes bracket, motors, cardan joints, propshafts and nylon props.

i will also include some brass tubing 4/3,1mm for the rudders and some spare nylon props to make lassek's M3 brass props fit onto the M2 shafts (see thread "fixing M3 props on M2 shafts)

the motors are rated at 7,2 volts . supplied with 6 volts is more than enough power

.
if you like you can have them as 6 volts version, but i wouldn't suggest using them...too much power

don't worry about your english, it's much better than my french.. ;D

will send you bank details in a pm

markus

Last Edit: Apr 1, 2008 17:13:47 GMT 1 by markus

french model kits are really special ;-)

Deleted Deleted Member Posts: 0	allemand R/C gears Apr 2, 2008 8:52:16 GMT 1 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Deleted on Apr 2, 2008 8:52:16 GMT 1 You'll be getting my order in a few weeks time for the props + shafts and rudders.

brianc Midshipman Posts: 48	allemand R/C gears Apr 3, 2008 15:53:45 GMT 1 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by brianc on Apr 3, 2008 15:53:45 GMT 1 I`ll be looking for props,shafts and rudders too,if thats OK Markus?
	A bad day modelling is better than a good day working

markus Commander of the fleet french lady Posts: 1,495	allemand R/C gears Apr 3, 2008 17:36:27 GMT 1 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by markus on Apr 3, 2008 17:36:27 GMT 1 looking foward to orders from both of you markus
	french model kits are really special ;-)

belgianboatbuilder
New recruit

Posts: 1

allemand R/C gears Feb 5, 2009 23:45:25 GMT 1

Quote

Post by belgianboatbuilder on Feb 5, 2009 23:45:25 GMT 1

I'am new here
I will building the bismarck as a rc model with the three motor setup.
I have a transmitter of 40mhz ch59 freq.40,785
It has 7 ch. (4 wich are operated by sticks, 1 operated by switch, 1 operated by switch in 3 positions and 1 switch on/off)
the battery is 6 cells of 9,6 1800ma. Will it work with the 3 motor setup

markus
Commander of the fleet

french lady

Posts: 1,495

allemand R/C gears Feb 6, 2009 21:17:57 GMT 1

Quote

Post by markus on Feb 6, 2009 21:17:57 GMT 1

Feb 5, 2009 23:45:25 GMT 1 belgianboatbuilder said:

I'am new here
I will building the bismarck as a rc model with the three motor setup.
I have a transmitter of 40mhz ch59 freq.40,785
It has 7 ch. (4 wich are operated by sticks, 1 operated by switch, 1 operated by switch in 3 positions and 1 switch on/off)
the battery is 6 cells of 9,6 1800ma. Will it work with the 3 motor setup

welcome ~~belgianbobthebuilder~~ belgianboatbuilder !

it definetly will - with lots of extra functions if you like

markus

Last Edit: Feb 6, 2009 21:22:55 GMT 1 by markus

french model kits are really special ;-)