|
|
Post by rem2007 on May 12, 2008 22:58:01 GMT 1
Thanks Markus ;D
|
|
|
|
Post by swanrail on May 12, 2008 23:05:32 GMT 1
Rather sad Mark, due to Health and Safety regs (this country has gone bananas), this morning any beer left in the casks had to be poured down the ditch, so tonight we have a lot of happy bunnies celebrating my birthday!!!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 13, 2008 7:01:36 GMT 1
|
|
|
|
Post by eric on May 13, 2008 7:05:11 GMT 1
That's insane.........this country is slowly but surly being throttled to death by red tape.
|
|
|
|
Post by Mark on May 13, 2008 7:22:49 GMT 1
Sheer stupidity. Mind, it's not just this country. A few days ago somebody in a well known company sent an accident notification to a wide audience. They had carried out a root cause analysis, came up with 8 action points, and the person hurt had to work from home for a while.
Wanna guess what the accident was ?
Somebody stubbed their toe on a door in the ladies !!!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 13, 2008 9:16:29 GMT 1
ROFL Sheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeesh what is the world coming too!!!!!!!!!!
|
|
|
|
Post by Mikey on May 18, 2008 22:37:23 GMT 1
The end, maybe? It's only 8 years late!!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 19, 2008 6:13:51 GMT 1
Only 8 years, you sure it's not more  |
|
|
|
Post by eric on May 19, 2008 7:07:04 GMT 1
Could 'the end' just hold off for two years, please?
I want to get my Bismarck finished!
|
|
|
|
Post by Mikey on May 19, 2008 15:29:20 GMT 1
Indeed! Well, had an almost barbecue this weekend. Didn't have to waste any left over drinks, which means I could modify my workshop like so:  Now thats what I call a fully fitted out ship yard!!! ;D As with all alcoholic beverages it's best enjoyed responsibly. One question, The recessed belt armour, is it one layer of planking or two? Better to get it straight in my head now then before I start veering from the build plans!! |
|
|
|
Post by markus on May 19, 2008 17:19:46 GMT 1
that beer label looks quite familiar to me
looks like 'grafenwalder pils' from LIDL, right ?
the recessed part is only single planked as per instructions, but i would suggest to do a 2nd layer if possible...
markus
|
|
|
|
Post by Mikey on May 19, 2008 17:23:53 GMT 1
it is indeed. you must know it well? ;D
|
|
|
|
Post by markus on May 19, 2008 17:28:39 GMT 1
it is indeed. you must know it well? ;D yep - quite cheap, good taste and no headache the day after ;D ;D markus |
|
|
|
Post by matt on Nov 3, 2008 18:58:56 GMT 1
Hello Don. Still building the decks and had a question on the Lower Deck.
The Hachette Lower Deck that was sent to us has a large area in the middle with no planking on it. As I am building my own do I need this area or just copy the planking as shown?
Does the part above sit on top of the lower deck planks or does it go into them? Thanks for any help
Matt
|
|
|
|
Post by swanrail on Nov 4, 2008 0:05:59 GMT 1
Hi Matt, I cut a large centre piece from a 1mm sheet. You can cut out the supplied deck around the outer side of the deck margin as a pattern.
On the main deck, I simplified this by making the margin planks wider and leaving the centre part untouched, which in retrospect can also be done on the deck you are referring to. In both cases, the superstructure sits on top of the margin planks, cutting in is too difficult and not intended.
Regards,
|
|
