|
Post by markus on Oct 9, 2009 17:04:51 GMT 1
I saw a comment about the hangers being too wide - can't remember where now - maybe your build Markus ? I was thinking of replacing the inner wall with plastic card to avoid hours of sanding and the mountain of dust (and the ear ache that goes with getting the house all dusty !) By the way Markus, your signature is a bit out of date plastic card ? damn, should have had that idea some months ago ok, ok - will change my signature..... ;D markus
|
|
|
Post by Baz on Oct 10, 2009 8:06:34 GMT 1
Mark
You don't even need plastic card The hanger goes up against the funnel Just remove the inside wall ..... full stop
Baz
|
|
|
Post by Daniel on Jun 21, 2010 13:01:23 GMT 1
Good afternoon ladies and gentlemen, hope everyone is doing well.
Wow I haven't posted for 7 months :S , never mind I'm still going....very very slowly...
Thought I'd just show my face first, I'm busy on the hull once again, just cannot seem to get a smooth enough finish for my liking but hey ho.
There will be some pictures up by this evening hopefully
Daniel
|
|
|
Post by Daniel on Jun 23, 2010 16:10:03 GMT 1
|
|
|
Post by nm on Jun 23, 2010 20:31:49 GMT 1
Now, that's SMOOTH!
nm
|
|
|
Post by Daniel on Jun 24, 2010 17:50:04 GMT 1
haha thank you NM , Its taken a while, as you can see the very top of the hull still needs a little work but I won't spend too much time on it as I'm afraid its getting too thin as my decking sections are practically touching the edge :/
|
|
|
Post by Thymen on Jun 28, 2010 9:41:02 GMT 1
That really looks smooth! I hope you had the hull the right way up when you drew those lines, otherwise they will have a curve in them.
|
|
|
Post by Daniel on Jun 28, 2010 17:36:58 GMT 1
Cheers Tymen and don't worry the hull was up the right way when I did the lines
|
|
|
Post by popeye on Jun 30, 2010 16:32:39 GMT 1
This shows my Bismarck ready for painting with the line marking tool sitting on the hull. This marked of the lower end of the black line, I then added screwed on another piece of wood to lift the marker pen up about 1cm to mark round the upper end of the black line. You can see the 2 lines for the black area drawn on the hull - the rest is all taping and spraying !!!
|
|